ROWELD P 250A Zestaw, 230V
The P 250A for use on the construction site and in the workshop. It is particularly suitable for sanitary installations in the drainage area and for chimney pipe rehabilitation with PVDF pipes.
- Flexible for difficult positions due to removable heating element
- Protection against unintentional starting and jumping out of the milling device
- Milling possible on one and both sides
- Torsionally stiff, for minimum drag pressure and low-loss power transmission
- Precise welding force adjustment due to clear force scale
- Safe, torsionally rigid transfer of welding forces
- Always available stable work table
Wybrany wariant
Kup online
Znajdź dealera w pobliżu
Wybierz sprzedawcę za pośrednictwem
Opis produktu
The P 250A plastic pipe welding machine is the all-rounder on the construction site and in the workshop. It is particularly suitable for sanitary installations in the drainage area as well as for chimney pipe rehabilitation with PVDF pipes.
Funkcje i cechy
110 V AC
115 V AC
230 V AC
230 V AC
Zakres dostawy
- ROWELD P250A Bare tool with Planer
- P250A Heating Element
- Basic Clamping Jaw Set 250 mm
- Basic Clamping Jaw Set, 160 mm
- Reducer Clamping Insert 40 mm
- 50 mm reduction clamping insert
- 56 mm reduction clamping insert
- 63 mm reduction clamping insert
- 75 mm reduction clamping insert
- 90 mm reduction clamping insert
- 110 mm reduction clamping insert
- 125 mm reduction clamping insert
- 140 mm reduction clamping insert
- 180 mm reduction clamping insert
- 200 mm reduction clamping insert
- 225 mm reduction clamping insert
- Support fork insert 40/125 mm
- Support fork insert 50/110 mm
- Support fork insert 56/90 mm
- Support fork insert 63/75 mm
- Support fork insert 140 mm
- Support fork insert 180 mm
- Support fork insert 200 mm
- Support fork insert 225 mm
- 6 mm hex key
- Hex key, size 8 mm
- Open-end wrench, size 17 mm
- Data disc
- Instruction manual
- Service Manual
Dane techniczne
Najważniejsze fakty w skrócie
| Moc pobierana (min-max) | 0 – 1.500 W |
| Napięcie (min-max) | 230 V |
| Średnica obszaru roboczego w mm (min-max) | 40 - 250 mm |
| Temperatura obszaru roboczego (min-max) | 160 – 285 °C |
| Odpowiednie Matrialias | PE, PP, PVDF |
| Typ wtyczki zasilania | Wtyczka typu F (CEE 7/4) |
| Dokumentacja | Nie |
| Częstotliwość sieci z jednostką miary | 50/60 Hz |